File:Carbide3D-Nomad-Inch.pp.txt

From ShapeOko
Jump to: navigation, search
Carbide3D-Nomad-Inch.pp.txt(file size: 1 KB, MIME type: text/plain)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.

remove .txt filename extension to use.

Vectric post processor for the Nomad 883 and Nomad 883 Pro. Handles tool changes and spindle control (speed, on/off).

Initial testing indicates that they are correct. None-the-less they should be treated with some suspicion until we additional feedback indicates that they work correctly, safely and efficiently.

Be sure to run air passes and keep your hand near the E-Stop the first few times a job is run.

Carbide3D-Nomad-Inch.pp - For VCarvePro and Cut2D Carbide3D-Nomad-PhotoVCarve-Inch.pp - For PhotoVCarve only

Don't buy or use Cut3D - use MeshCAM!

-- Mark Bellon

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current21:27, 14 October 2015 (1 KB)Willadams (Talk | contribs)remove .txt filename extension to use. Vectric post processor for the Nomad 883 and Nomad 883 Pro. Handles tool changes and spindle control (speed, on/off). Initial testing indicates that they are correct. None-the-less they should be treated with some
  • You cannot overwrite this file.

The following page links to this file: