Gantry 1

From ShapeOko
Jump to: navigation, search

Belt Clip Assembly (PS20020)

Need a note (and a photo?) to show which way up to place the insertion nut. (Have photo white background).

Sub Gantry (PS20023)

Note about the two maker slides have the lips pointing outwards. (mirror arrangement - better words needed...)

Tapping! Makerslide is not magically tapped :) As there are eight bolt - all eight holes need to be tapped.


Slide the Z-Axis Assembly gantry carriage (PS20031) from the previous step onto the gantry (see below) before attaching the second motor mount plate.

replace with

Slide the first Belt assembley, then Slide the Z-Axis Assembly gantry carriage (PS20031) from the previous step onto the gantry (see below) then the next the first Belt assembley, See drawing for which makerslide each Belt assembley goes on and the orientation. then attatch the second motor mount plate.