Kickstarter Electronics

From ShapeOko
Jump to: navigation, search

Connecting your Electronics:


Other Electronics Set ups

  • Strip ends of wires
  • Splice on an extra foot of stepper cable to your X and Z axis motor leads (use the screw down terminals)
  • Crimp your connectors onto the end of the cables.

If you're unfamiliar with crimping the .1" molex connectors and/or don't have the proper crimper. Here's a video from nophead (of reprap fame) showing how to complete this step with just a pair of needle-nose pliers.

Power Supply

(c13 end of power supply)
(end of power supply with 6 pin mini-fit)
(6pin mini-fit to 4pin molex)

Next: Assembly step 15