All public logs

Jump to: navigation, search

Combined display of all available logs of ShapeOko. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

Logs      

Show tag log

  • 09:47, 27 March 2020 Team (Talk | contribs) deleted page Laser Cutter (content was: "Safety: https://www.reddit.com/r/lasercutting/comments/5ew8zj/my_thoughts_on_laser_safety/ More on safety specifically discussing the dangers of the wavelength usually used for small diode lasers: https://community.carbide3d.com/t/uncon...")
  • 12:55, 25 March 2020 Team (Talk | contribs) deleted page LaserOko (content was: " ==LaserOko== '''Created by:''' User:SnapFracturePop '''Description:''' Convert the Shapeoko to a low-power laser cutter '''Status:''' Fully functional '''Benefits:''' # Cut things with lasers (w/in the limits of the selected las...")
  • 16:17, 4 February 2020 Team (Talk | contribs) deleted page Enclosures (content was: "There are two varieties of enclosures which are associated with CNC machines: * Electronics Enclosures --- for protecting one's electronics and making th..." (and the only contributor was "Willadams"))
  • 16:17, 4 February 2020 Team (Talk | contribs) deleted page Emergency Stop (content was: "Emergency Stop buttons are used to stop all motion in an emergency, for example if a finger, hair, jewelry, etc becomes entangled in the machine. Industrially, E-Stop buttons are typically linked to the circuit breaker that powers the un...")
  • 16:16, 4 February 2020 Team (Talk | contribs) deleted page Drive Shaft (content was: "==General Overview== Initial discussion in the old Google Groups at: http://groups.google.com/group/shapeoko/browse_thread/thread/6981bc9713c79f38/6dd76af64a02fc2b?lnk=gst&q=shaft#6dd76af64a02fc2b and continuing on [http://www.shapeoko....")
  • 16:16, 4 February 2020 Team (Talk | contribs) deleted page Cable Management (content was: "==Expandable Sleeving== The ShapeOko 2 makes use of this: [https://www.inventables.com/technologies/black-expandable-sleeving Black Expandable Sleeving]. Similar, and installable after-the-fact is spiral cable wrap. ==Drag Chain== ===...")
  • 16:51, 3 February 2020 Team (Talk | contribs) deleted page Scaling Up (content was: "Scaling up is a simple mechanical matter --- since the Shapeoko is a simple machine w/o encoders (in its default configuration using Grbl 0.8, though 0.9 has added settings for this, which are now supported to allow for rapid positioning...")
  • 16:49, 3 February 2020 Team (Talk | contribs) deleted page Dual Motor (content was: "Having a dual motor setup involves adding a second stepper to the gantry to ensure there is no play (or "wiggle") to the gantry's movement. In a standard single-motor setup, the far side of the gantry just follows along (but cf. Drive...")
  • 16:48, 3 February 2020 Team (Talk | contribs) deleted page Double Makerslide X-Axis (content was: "This upgrade, in a slightly simplified form, is now standard on the ShapeOko 2 There are still some considerations, alternatives and possibilities however: * Fastening the two lengths of MakerSlide together makes the assembly much stif...")
  • 16:47, 3 February 2020 Team (Talk | contribs) deleted page Open End Plates (content was: "These were designed to allow one to: * expand a unit along the X-axis * open up the machine for easier access and work-holding * increase range of movement a..." (and the only contributor was "Willadams"))
  • 16:47, 3 February 2020 Team (Talk | contribs) deleted page Belt Anchors (content was: "OK. The '''belt anchors''' aren't the sexiest part of the ShapeOko. Use the default configuration to get your ShapeOko up and running. Then, use one of the designs below to create your own, better belt anchor. File:belts_5.JPG|200px...")
  • 16:46, 3 February 2020 Team (Talk | contribs) deleted page ACME Z-axis (content was: "The Z-axis has seen a number of different efforts at improving it. The original Acme Z-axis upgrade for the first version of the machine is still documented h..." (and the only contributor was "Willadams"))
  • 15:51, 3 February 2020 Team (Talk | contribs) deleted page Calibration and Squaring the Machine (Outdated, not needed)