ACME Z-axis (SO1)

From ShapeOko
Revision as of 15:46, 2 October 2012 by Improbable Construct (Talk | contribs) (Created page with "==Upgrade Name: ACME Z-axis== ===Overview=== '''Created by:''' User:Improbable Construct '''Description:''' An Upgrade that replaces the M8 threaded rod with a 3/8"-10 Ac...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Upgrade Name: ACME Z-axis

Overview

Created by: User:Improbable Construct

Description: An Upgrade that replaces the M8 threaded rod with a 3/8"-10 Acme Screw.

Status: Fully functional

Materials: 1. 1x 3/8-12 Acme screw 200mm of threads turned down to 8mm on both ends. 2. 1x Delrin ACME nut 3. 2x Bearing Blocks / Motor Mounts 4. 2x 608 Bearings 5. 4x M5x20 socket head cap screws 6. 4x M5 washers 7. 1x 8mm shim washer

Cost: $75.00 for the kit

Details

Discussion in the [1]


basic wire management solution


And here is a picture of the physical implementation of the design.

basic machine solution

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7