Difference between revisions of "Assembly step 14"
From ShapeOko
| Line 1: | Line 1: | ||
Connecting your Electronics: | Connecting your Electronics: | ||
| − | If you have the inventables electronics, go [Inventables_Electronics here]. | + | If you have the inventables electronics, go [[Inventables_Electronics|here]]. |
==Wire your motors== | ==Wire your motors== | ||
Revision as of 18:31, 19 June 2012
Connecting your Electronics:
If you have the inventables electronics, go here.
Wire your motors
- Strip ends of wires
- Splice on an extra foot of stepper cable to your X and Z axis motor leads (use the screw down terminals)
- Crimp your connectors onto the end of the cables.
If you're unfamiliar with crimping the .1" molex connectors and/or don't have the proper crimper. Here's a video from nophead (of reprap fame) showing how to complete this step with just a pair of needle-nose pliers.
