Difference between revisions of "Assembly step 4"

From ShapeOko
Jump to: navigation, search
(added reference image)
 
(formatted instructions)
Line 1: Line 1:
 
[[File:SM-YA01.png|900px|center]]
 
[[File:SM-YA01.png|900px|center]]
 +
 +
==Instructions==
 +
'''Y-Axis Motor Mount Plate'''
 +
 +
''(This is the other side of the gantry. Pay attention to the hole orientation at the top of the plate.)''
 +
 +
'''Take note of a couple of things:'''
 +
* These holes need to be on the left (opposite of the previous sub-assembly). The image shows the correct orientation.
 +
* Each Bolt that goes through the plate gets a washer on BOTH sides.
 +
* The smooth idlers get a total of 4 washers per bolt.
 +
** One on the backside of the plate
 +
** One on the front side of the plate
 +
** One on the end of the 1/4" spacer
 +
** One between the idler and the nut that keeps it all together.
  
 
==User Submitted Notes==
 
==User Submitted Notes==
 
(This is the section to add your own notes pertaining to this sub-assembly) If you run into a problem or find yourself asking a question, please post the solution here to help the next person who has the same problem/question)
 
(This is the section to add your own notes pertaining to this sub-assembly) If you run into a problem or find yourself asking a question, please post the solution here to help the next person who has the same problem/question)

Revision as of 15:23, 6 June 2012

SM-YA01.png

Instructions

Y-Axis Motor Mount Plate

(This is the other side of the gantry. Pay attention to the hole orientation at the top of the plate.)

Take note of a couple of things:

  • These holes need to be on the left (opposite of the previous sub-assembly). The image shows the correct orientation.
  • Each Bolt that goes through the plate gets a washer on BOTH sides.
  • The smooth idlers get a total of 4 washers per bolt.
    • One on the backside of the plate
    • One on the front side of the plate
    • One on the end of the 1/4" spacer
    • One between the idler and the nut that keeps it all together.

User Submitted Notes

(This is the section to add your own notes pertaining to this sub-assembly) If you run into a problem or find yourself asking a question, please post the solution here to help the next person who has the same problem/question)