Design into 3D: box: mitered

From ShapeOko
Revision as of 12:11, 7 April 2019 by Willadams (Talk | contribs) (Created page with "A simple box design requiring only a 90 degree V endmill and suitable stock and workholding. This project design is discussed at: https://community.carbide3d.com/t/design-int...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

A simple box design requiring only a 90 degree V endmill and suitable stock and workholding.

This project design is discussed at: https://community.carbide3d.com/t/design-into-3d-miter-box/13813 and is a part of the Design into 3D Kickstarter.