Difference between revisions of "End mills"

From ShapeOko
Jump to: navigation, search
(added information from enco website)
(added endmill types)
Line 30: Line 30:
 
Offering some of the advantages of solid carbide tooling, carbide is brazed to the cutting edges of steel tool bodies. This
 
Offering some of the advantages of solid carbide tooling, carbide is brazed to the cutting edges of steel tool bodies. This
 
is particularly a cost-effective option for larger diameter tools.
 
is particularly a cost-effective option for larger diameter tools.
 +
 +
==END MILL TYPE==
 +
===Finishing End Mills===
 +
Square End: Used for general milling applications
 +
Ball End: Used for shallow slotting, contour milling and pocketing applications. Used to produce a radius in the bottom of slots or pockets
 +
for added strength. Also used to create compound curves for molds and dies where sharp corners must be avoided.
 +
 +
===Roughing End Mills===
 +
In order to improve productivity over a conventional end mill, the roughing end mill (also known as a hog mill) was designed not to last
 +
longer, but to remove more material by taking heavier cuts in a fixed amount of time, without creating vibration. Ideal for today’s rigid and
 +
powerful CNC machinery.
 +
 +
===Coarse Tooth===
 +
This is the most commonly found profile. It is excellent in deep slotting conditions and heavy side cuts, and its design draws
 +
the least amount of power consumption. It is recommended for heavy machining conditions where high metal removal rates are required.
 +
Fine Tooth: Designed to increase tool life over a coarser profile, this style is recommended for profiling operations. The fine profile has a
 +
shape, which provides the tool with a stronger edge that will last longer and permits a better surface finish on the workpiece. Works well in
 +
harder materials such as Inconel and Hastalloy.

Revision as of 16:42, 21 August 2012

Good info about end mills on BuildYourCNC


(Following information is from the enco website)

End Mills

High Speed Steel (HSS)

Provides good wear resistance and costs less than cobalt or carbide end mills. HSS is used for general purpose milling of both ferrous and non-ferrous materials.

Cobalt (M-42: 8% Cobalt)

Provides better wear resistance, higher hot hardness and toughness than high speed steel. There is very little chipping or microchipping under severe cutting conditions allowing the tool to run 10% faster than HSS, resulting in excellent metal removal rates as well as good finishes. This material, combined with the proper geometry has proven the most cost-effective for machining cast iron, heat treated steels and titanium alloys.

Powdered Metal (PM) Cobalt

A cost effective alternative to solid carbide, powdered metal is tougher and less prone to breakage. Tools perform well in materials <30RC. PM is used in high-shock and high-stock applications such as roughing.

Solid Carbide

Primarily used in finishing applications, carbide provides several advantages over HSS or cobalt materials. Carbide can run much faster because of the material’s extreme hardness. This allows the cutter to withstand high cutting temperatures and provides excellent wear resistance. Carbide also provides better rigidity than HSS, which enables the end mill to provide a higher degree of dimensional accuracy and superior surface finishes. Carbide provides the user with the ability to run faster with less tool wear. However, the user should be aware that carbide’s hardness comes at the expense of its toughness. Carbide is brittle and tends to chip when conditions are not ideal, rather than wear. Heavy feed rates are more suitable for HSS and cobalt tools. Carbide end mills, which can be run 2-3X faster than HSS, are best for maximizing speed and tool life.

Carbide-Tipped

Offering some of the advantages of solid carbide tooling, carbide is brazed to the cutting edges of steel tool bodies. This is particularly a cost-effective option for larger diameter tools.

END MILL TYPE

Finishing End Mills

Square End: Used for general milling applications Ball End: Used for shallow slotting, contour milling and pocketing applications. Used to produce a radius in the bottom of slots or pockets for added strength. Also used to create compound curves for molds and dies where sharp corners must be avoided.

Roughing End Mills

In order to improve productivity over a conventional end mill, the roughing end mill (also known as a hog mill) was designed not to last longer, but to remove more material by taking heavier cuts in a fixed amount of time, without creating vibration. Ideal for today’s rigid and powerful CNC machinery.

Coarse Tooth

This is the most commonly found profile. It is excellent in deep slotting conditions and heavy side cuts, and its design draws

the least amount of power consumption. It is recommended for heavy machining conditions where high metal removal rates are required. Fine Tooth: Designed to increase tool life over a coarser profile, this style is recommended for profiling operations. The fine profile has a shape, which provides the tool with a stronger edge that will last longer and permits a better surface finish on the workpiece. Works well in harder materials such as Inconel and Hastalloy.