Difference between revisions of "Inventables Electronics Batch 1"

From ShapeOko
Jump to: navigation, search
m
m
Line 1: Line 1:
 
==Overview==
 
==Overview==
 
ShapeOko kits purchased through Inventables come with a full set of electronics, which includes the following:
 
ShapeOko kits purchased through Inventables come with a full set of electronics, which includes the following:
{| border="1" style="text-align:center;"
+
*Arduino Uno
|-
+
*GRBLShield
| style="width: 15%"|Arduino Uno
+
*Power Supply
| style="width: 15%"|GRBLShield
+
*Stepper Motors
| style="width: 15%"|Power Supply
+
*Spindle
|-
+
*Emergency Stop
|[[File:E4.JPG|150px]]
+
*Terminal Strip
|[[File:Stepper_shield.jpg|150px]]
+
*Cables and Connectors
|[[File:E2.JPG|150px]]
+
*Case
|}
+
  
 
==Arduino==
 
==Arduino==
 
The [http://arduino.cc Arduino] is the heart of the electronics. It contains an AVR Processor, a USB connector, and I/O pins. The Arduino comes with [[grbl]] already installed on board. grbl reads g-code that is sent over USB and translates it into movements for the stepper motors on the ShapeOKO. The particular version of grbl on the Arduino also comes pre-configured for the ShapeOKO, and should not require any tweaking to operate.
 
The [http://arduino.cc Arduino] is the heart of the electronics. It contains an AVR Processor, a USB connector, and I/O pins. The Arduino comes with [[grbl]] already installed on board. grbl reads g-code that is sent over USB and translates it into movements for the stepper motors on the ShapeOKO. The particular version of grbl on the Arduino also comes pre-configured for the ShapeOKO, and should not require any tweaking to operate.

Revision as of 13:34, 19 June 2012

Overview

ShapeOko kits purchased through Inventables come with a full set of electronics, which includes the following:

  • Arduino Uno
  • GRBLShield
  • Power Supply
  • Stepper Motors
  • Spindle
  • Emergency Stop
  • Terminal Strip
  • Cables and Connectors
  • Case

Arduino

The Arduino is the heart of the electronics. It contains an AVR Processor, a USB connector, and I/O pins. The Arduino comes with grbl already installed on board. grbl reads g-code that is sent over USB and translates it into movements for the stepper motors on the ShapeOKO. The particular version of grbl on the Arduino also comes pre-configured for the ShapeOKO, and should not require any tweaking to operate.