Difference between revisions of "Tools"

From ShapeOko
Jump to: navigation, search
(Tools Required)
(Optional tools)
Line 36: Line 36:
 
=Optional tools=
 
=Optional tools=
  
Filing tools or Dremel with milling bit: The Shapeokos produced since the Inventables batches have coated mounting plates. The paint (red paint and white primer) on these plates must be removed from the holes for the bolts to fit.
+
Filing tools or Dremel with milling bit: The Shapeokos produced in Inventables batch #1 have coated mounting plates. The paint (red paint and white primer) on these plates must be removed from the holes for the bolts to fit.

Revision as of 12:53, 17 August 2012

Tools Required

  • M4 Allen wrench
  • M2.5 Allen wrench
  • M2 Allen wrench
  • M1.5 Allen wrench
Allen wrenches.JPG
  • Blue Loctite (or equivalent)
Blue loctite.PNG
Note: The loctite might not be necessary, but is handy to have around. As the machine vibrates (and it will), your bolted connections have the potential of loosening. If this occurs, use a dab of blue locktight to prevent the guilty bolt of coming loose. It's not necessary to to loctite any of the bolts *unless* they begin to loosen.
  • Small Pliers
Pliers.JPG
  • 1/2" open-end wrench
  • 5/16" open-end wrench
Open end wrenches.JPG
  • M5 0.8 pitch Tap
  • T-handle
Tap and die set.JPG
  • Soldering iron
Soldering iron.JPG

Optional tools

Filing tools or Dremel with milling bit: The Shapeokos produced in Inventables batch #1 have coated mounting plates. The paint (red paint and white primer) on these plates must be removed from the holes for the bolts to fit.