Shapeoko upgrades can be categorized into four major categories:
- those which increase stiffness / rigidity
- those which increase working area
- different spindle choices — see Spindle Overview
- those which are for user convenience / other
The eShapeOko (European / Extended) marketed by cvoinescu includes a number of upgrades by default as well as a number of options at order time.
The ShapeOko 3 has been announced and is an all-new machine design which obviates the need for most upgrades and makes expanding the machine much simpler.
Results of upgrades: cutting aerospace tooling to under 0.1mm (0.004") accuracy.
Andrew Spurgeon's spindles and mods: https://drive.google.com/file/d/0Bz-KxXzikAWwSy1HeDR1ZlA1YzQ/view (pdf)
- 1 Stiffness/rigidity
- 2 Working area
- 3 Spindles / Tooling
- 4 Other
- 4.1 Z-axis
- 4.2 Belt Anchors
- 4.3 Cable Management
- 4.4 Camera / Microscope
- 4.5 Dust collection
- 4.6 Emergency Stop (E-Stop)
- 4.7 Enclosures
- 4.8 Headless
- 4.9 Pendant
- 4.10 Limit (Home) Switches
- 4.11 Edge Finder
- 4.12 Touch / digitizer Probe
- 4.13 Painting
- 4.14 Workholding
- 4.15 Other
- 4.16 Dust protection
- 4.17 Coolant System
- 4.18 Additional Axis
- 4.19 Motors
- 4.20 Controller Modifications
- 4.21 Automatic Tool Changer
- 5 Sources
- 6 Resources
- 7 Other
The importance of improving this cannot be understated as noted in forum discussion: Re: spindle power / feed rate.
User cvoinescu made an initial codification of the effect of upgrades on stiffness / rigidity in the forum thread Custom Plates. In order of effectiveness of the modifications (from most effective to least):
- Dual Y drive (either Drive Shaft or Dual Motor)
- Double Makerslide X-Axis --- shapeoko_upgrade_parts_v3.zip
- X carriage reinforced with, say, extrusion between the two plates, instead of relying only on the X wheel bolts
- the two X rails 20-30mm apart and rigidly coupled together, e.g. sandwiching between them some standard extrusion and bolted together along the length
- Moving the Z wheels further apart, i.e. replacing the standard plate with a taller one
- (for a long machine) Mid-span supports for the Y rails, and/or doubling it with standard extrusion bolted along the length --- two supports evenly spaced for each side optimal. c.f. http://www.improbableconstruct.com/collections/upgrades/products/shapeoko-2-mid-span-support and Mid Span Supports
- Moving the Z leadscrew to the side to reduce the length (and hence flex) of the Z wheel bolts
- Thicker plates
There is some uncertainty about the order of the last two items on the list.
With the Shapeoko 2 already having many upgrades in place already, the priority shifts a bit --- best rigidity mods for SO2?:
- bolting X-axis Makerslide together
- mount spindle closer
One straight-forward and inexpensive way to improve rigidity is to replace the nylon spacers. There are several options.
"Biggest bang for the buck."
Now standard on the Shapeoko 2. Forum discussion in We should switch to metal spacers.
A 10-pack of 1/4" spacers should fit out a machine w/ Double Makerslide X-Axis --- 6 1" spacers (and some washers) will properly space the carriage (drilling 2 additional holes in the Z-axis mount plate will let one use 2 additional bolts and 4 more 1" spacers to finish off a 10-pack and further improve a machine's rigidity).
Alternately, user wlanfox used plastic blocks instead of spacers as shown in the forum post Shapeoko #0735, mods evolution... (at least my version) ;-)
A third option is to use (locking) nuts in lieu of the spacers as danimal documented in Re: Why not a wider "double X-axis"?
There is now a hard-coated Makerslide alternative, Openrail, which in theory affords the usage of steel wheels (in practice, not so much). Forum user microwavesafe took advantage of this for his machine as documented in X and Z mods.
Note that they are most useful for the X- and Z-axes: Re: Metal Dual V wheel And Fishing line pulley Bearing and Re: Hardcoat OpenRail.
Double X-carriage motor mount plates
Another option which needs to be fitted into the above is doubling up the motor mounting plates for the X/Z plate assembly and increasing the number of bolts used so as to create more rigid torsion box as the eShapeoko does (though its is also taller) --- this upgrade has since become standard in the ShapeOko 2.
A similar modification for the Shapeoko 3 is shown at: https://www.shapeoko.com/forum/viewtopic.php?f=7&t=9221&p=68843#p68843
The Double Makerslide X-Axis upgrade is the primary way to address this. Now standard on the Shapeoko 2.
A similar idea to increase the rigidity of the gantry is shown in Bar across the back...
- fasten the two lengths of rail together --- bolt, screw, epoxy or use the Makerslide joining clips
- sister in length(s) of steel along the top or bottom or in-between
- fashion some sort of plates to join the pieces of Makerslide together
Furthering this idea, Xaracen extended the V-wheel bolts for his Z-axis through his gantry on his SO1 by drilling matching holes, using longer bolts and appropriate spacers. http://www.shapeoko.com/forum/viewtopic.php?f=11&t=3734&p=37129#p37126
Yet another option is to add additional sets of wheels mounted to a secondary carriage as done on Marty's Shapeoko2 Deluxe.
Some Z-axis upgrades for the Shapeoko 3 have added linear rail along the bottom of the gantry rail: http://community.carbide3d.com/t/liear-rail-makes-the-world-of-difference/9174
These upgrades are easily compared and complementary in nature, see the page Scaling Up.
Often, other minor upgrades can affect this, e.g., moving belts to the outside as documented in some of the methods shown on the Belt Anchors page, or Belt on outside, but it is also possible to lose working area as when doubling the X-axis Makerslide.
Open End Plates
One elegant solution is the Open End Plates, which allow one to extend a machine along the X-axis more readily. Now standard on the Shapeoko 2.
Another alternative is to use aluminum extrusion itself for the frame as forum user Juicebox did in Just Enlarged my Shapeoko with some UpGrades.
Spindles / Tooling
Upgrading the spindle from the basic rotary tool included with the stock SO1/2 was a common upgrade. Even w/ the SO3, there are people who choose to use spindles other than the suggested Dewalt DWP611.
See Spindle Overview for more detailed discussion.
https://shop.carbide3d.com/collections/shapeoko-hd/products/shapeoko-hdz  --- Dust shoe for HDZ which includes re-drawings: https://community.carbide3d.com/t/wip-frame-around-hdz-spindle/16265/9 The top of the v3.3 HDZ is ~19" from the bottom of the front endplate of an XL/XXL. Maintenance: Mobil Vactra Oil No.2 inserted into the small M4 hole every 6 months.
- ACME Z-axis --- see also A new Z-axis nut - metal on metal w/ built in anti-backlash and Modified Z drive Assembly --- this upgrade is especially of interest to help overcome Grbl's limit that all axes must have the same acceleration.
- Possible New Z Axis Design for the ShapeOko (1)
Camera / Microscope
One option on some commercial machines is to mount a camera / microscope and to use it to zero the machine. The camera may also be used to monitor the machine and its cutting progress.
- http://www.shapeoko.com/forum/viewtopic.php?f=5&t=2344&start=70#p45670 video
- http://beatty-robotics.com/zeroing-a-cnc/ http://community.carbide3d.com/t/new-zero-camera/485 Forum discussion
- http://www.kd-dietz.com/klausphp/pages/eng/webcam_standaloneV3/description/cam_description.html --- edge finder program for Windows.
- Monitoring: http://shop.runcam.com/runcam-sky/ 
- Dust Shoe --- also see Spindle Options
- Vacuum options --- cyclone dust filtering, power controls
Emergency Stop (E-Stop)
Emergency Stop buttons are used to stop all motion in an emergency, for example if a finger, hair, jewelry, etc becomes entangled in the machine. Industrially, E-Stop buttons are typically linked to the circuit breaker that powers the unit.
An enclosure of some kind, either for the electronics, or the machine is essential if cutting metal, so as to protect the electronics from conductive chips.
As part of an enclosure, some users have worked up switching so as to allow switching between control boards: http://community.carbide3d.com/t/whats-better-than-one-cm-controller-two-of-course/3378
Adding a second Arduino and SD-card shield to allow headless operation
c.f., linear encoders: http://www.directindustry.com/industrial-manufacturer/linear-encoder-65005.html 
Carbide 3D BitZero
Available for purchase at: https://shop.carbide3d.com/products/shapeoko-touch-probe
- Dimensions: http://community.carbide3d.com/t/touch-plate-thickness/6941 and http://community.carbide3d.com/t/touch-probe-no-longer-going-to-be-offered/4786/188
Carbide 3D BitZero alligator connection:
Probe vs. Tool Length Sensor
Only usable in a spindle with low RPM
https://www.kbctools.com/itemdetail/?itemCode=1-811-108 --- works as fast as 1500 RPM
Touch / digitizer Probe
This essentially makes the machine into a 3D scanner, but may also be used for auto-levelling a board for making a PCB (c.f., Touch Plate)
Discussion of the need for a round ball: https://www.facebook.com/groups/232744457133521/permalink/284712001936766/
- Probee - A Contact Probe
- Touch Plate --- see the Limit switch page.
- https://www.thingiverse.com/thing:2351060 --- ingenious design which screws onto a Dewalt router.
- plans and software for constructing one here: http://www.vinland.com/Touch-Probe.html
- http://www.automationtechnologiesinc.com/products-page/cnc-parts/touch-and-tool-probe-quarter-inch-shaft --- commercial option which doubles as a plate
- The "One Penny" Touch Probe
- http://www.grunblau.com/downloadsbmo.htm 
- Thingiverse: Auto level tool for DeWALT 611 and Shapeoko
- http://www.homemetalshopclub.org/news/12/presentation_1202.pdf 
- https://www.sorotec.de/shop/product_info.php?info=p6411_3d-finder-messtaster.html 
Nio's V slot bed
- Y-Axis Wheel Covers --- includes mount for cotton swab for cleaning.
- X/Z Axis Plates Smaller plates for holding the X-axis motor and the whole Z-axis assembly.
- Pulley Drive system 4:1
- Shapeoko Z-Knob --- .svg source
- Under-Rail Lighting
- V Rail covers and brushes - ShapeOKO
- https://github.com/tbfleming/Shapeoko-Kirigami http://www.shapeoko.com/forum/viewtopic.php?f=5&t=4032 http://www.youtube.com/watch?v=K1Ka0ULu0as
- http://www.franksworkshop.com.au/CNC/Bellows/Bellows.htm 
Manual application of coolant is deprecated since it may cause thermal shock to the tool.
- https://www.thingiverse.com/thing:2773863 
- http://www.fogbuster.com/ 
- Cooling --- discussion of commercial option and list of parts for DIY: http://www.shapeoko.com/forum/viewtopic.php?f=24&t=7202&p=56771
- http://www.noga.com/nogaProducts.php?catID=moco  http://www.amazon.com/Mini-Cool-Nozzle-Cutting-Fluid-Applicator/dp/B00208Y57Y 
- WD40 drip system: http://community.carbide3d.com/t/its-finally-here-wd40-drip-can-how-to-video/2985 https://www.reddit.com/r/shapeoko/comments/40pmwc/shapeoko_3_second_metal_project_vise/cywn5bh
- http://www.tricocorp.com/product/lil-mister/  
- Mist Coolant Spray System Lubrication Machine For 8mm Air Pipe CNC Lathe Mill Drill (Amazon)
Reddit discussion w/ one post which links to commercial options on eBay: https://www.reddit.com/r/CNC/comments/4skqdw/helpcnc_3040_whats_a_cost_effective_way_to_add_a/
- Fourth Axis
- https://hackaday.com/2017/09/03/rolling-around-a-4th-axis/ 
- How to build a 4th axis with a collet holder --- YouTube video
- Mudshark implemented a rotary axis and wrote it up in Rotary Device.
- Psyko's implementation in Finally... 4th axis. A little journey in 4 axis milling.
- Sherline Mill CNC Rotary Table Model Workshop (via archive.org)
- CNCzone: Arduino Sherline Rotary Table controller
- Thingiverse: Quarto asse per laser 40W cinese (Fourth axis for laser 40W chinese)
- http://www.thingiverse.com/thing:144156 --- another design for a lasercutter
- Thingiverse: Poor Man's 4th Axis cnc
- Shapeoko 3
- Fifth Axis --- One could in theory just purchase an accessory table and bolt it to the bed of one's machine.
GrblGru now supports lathe functionality: http://www.shapeoko.com/forum/viewtopic.php?f=6&t=4710&p=42654
3D printable chuck: http://www.thingiverse.com/thing:5791
3D printable lathe: https://github.com/Intrinsically-Sublime/Printable-Lathe-V2
http://www.worldofward.com/rotarycontroller/ --- DIY Rotary Table Controller.
Another option is a collet block set such as: http://www.shars.com/products/toolholding-workholding/collet-fixtures/5c-collet-block-set 
See also CAM#Multiple_Axis
NEMA 23 motors
Upgrading the motors is usually done to:
- move the machine faster
- move a large, heavy spindle
there's no intrinsic reason to upgrade from NEMA17 motors.
Documented for the ShapeOko 2 in this forum post: Re: Caleb's Shapeoko 2 #3164. NEMA 23 Z-axis for shapeoko 2. Note that these may need longer fasteners --- 15mm per . It will also be necessary to source pulleys with a 1/4" bore (as opposed to the typical 5mm of NEMA 17 motors). A larger plate is needed for the Z-Axis and is available from I.C. on the Upgrades page --- NEMA 23 Z-Axis Kit.
- Nema23 on Z-Axis --- includes plans for mount plates. PDF file here: Re: Nema 23 Z Axis Plate and a link to Thingiverse.
- Shapeoko 2 Kit Mechanical Kit with Nema 23 --- project on Inventables.
Notes on motor selection size: You don't want a motor heavier than about 700 g, mostly because there's absolutely no point to it. Why would you want to be able to apply, say, 600 N to the gantry or X carriage, when you know that 100 N on your tool will flex the machine too much to be usable?
Z-axis Drive options
For the Z-axis, rather than directly driving the threaded/Acme rod, it's possible to use a belt drive:
Discussion here: http://www.shapeoko.com/forum/viewtopic.php?f=12&t=4368 and source files are available in this post: http://www.shapeoko.com/forum/viewtopic.php?f=12&t=4368&p=33383
Automatic Tool Changer
XATC = Automatic Tool Changer http://www.shapeoko.com/forum/viewtopic.php?f=11&t=8011
Commercial option for Kress spindles: http://www.cnccat.gr/index.php?id=2&productid=837&catid=89&subcatid=&lang=en
- https://improbableconstruct.com/ --- Acme Z-Axis, NEMA 23 Z-Axis, DW660 Mounts, DW660 Dust Shoe, Z-axis belt drive
- Inventables --- parts, dual drive kit, open end plate, motor mount plate
- Kbot3D --- 3D printed upgrade parts including: DW660 Vacuum Attachment/Dust Shoe, Lift Blocks, CNC Table Clamps
- Amber Spyglass Ltd --- parts, open end plates
- Reactive Storefront --- Precision V-Wheel Spacers
- Donek Tools --- Drag Knife for CNC Routers