Workholding

From ShapeOko
Revision as of 13:55, 15 April 2013 by Willadams (Talk | contribs) (Created page with "==Securing the Workpiece== You'll need some sort of option to hold the workpiece, from the basic double-sided tape to clamps along the edge of the piece to more sophisticated ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Securing the Workpiece

You'll need some sort of option to hold the workpiece, from the basic double-sided tape to clamps along the edge of the piece to more sophisticated work-holding methods such as V- and T-slot beds w/ custom clamps or a vacuum table (Forum discussion).

Discussions in the Forums: